Hard drive
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
2000000 h
Drive device, buffer size:A reserved segment of memory within a drive device that is used to hold the data being processed.
64 MB
Component for:What this product is used as a part of (component for).
Server/workstation
Hard drive size:The amount of data that the hard drive can store.
2.5"
Hard drive speed:The rotational speed of a hard disk expressed in rotations per minute. The faster the better.
10000 RPM
Hard drive interface:The way that a hard disk drive (HDD) is connected to the rest of the computer through a 'bus' such as ATA or SCSI.
SAS
Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
300 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
60 G
Non-operating vibration:Environmental requirements for vibration in non-operating mode
1.5 G
Operating vibration:Environmental requirements for vibration in operating mode
0.4 G
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
5 - 55 °C
Other features
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
6 Gbit/s
Power
Power consumption (idle):
3 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
5.8 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
204 g
Depth:The distance from the front to the back of something.
100.6 mm
Height:The measurement of the product from head to foot or from base to top.
14.8 mm
Width:The measurement or extent of something from side to side.
70.1 mm
