Main product

Overview


The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM Extenders, Switches and Splitters. It can also be used in place of a monitor to keep the graphics card of a PC or Server awake for remote access via IP. With support for resolutions up to Ultra HD 4K 60Hz (via cloning) including High-Dynamic Range and with the ability to passthrough HDCP 2.2 content, the Emulator is suitable for use with the very latest PC and AV applications.

Some computer systems, KVM switches and digital video signage systems may interrupt the flow of EDID data, or may not be able to pass this information directly back to the video card's output port. This adapter can be used to quickly and easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display, the cloning process takes less than 10 seconds!

It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.




At-a-glance


  • 2 Year warranty

  • Continuously emulates HDMI EDID information

  • Powered via HDMI Source Interface

  • Supports resolutions up to 3840x2160@60Hz including HDCP 2.2 pass-through and HDR

  • Uses cloned data or, when this is not available, stored pre-set screen resolutions/timings




Reasons to buy

  • 2 Year warranty
  • Continuously emulates HDMI EDID information
  • Powered via HDMI Source Interface
  • Supports resolutions up to 3840x2160@60Hz including HDCP 2.2 pass-through and HDR
  • Uses cloned data or, when this is not available, stored pre-set screen resolutions/timings

Specification

Technical Description: Lindy HDMI 2.0 EDID Emulator
Certificates
Certification:
CE, FCC, REACH
Compliance certificates:
RoHS

Certification
Certification:
CE, FCC, REACH
Compliance certificates:
RoHS

General
Type:Characteristics of the device.
Cable Gender Changers

Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 60 °C
Relative humidity:
0 - 80%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package type:The type of product package e.g. box.
Polybag
Package weight:Weight of the packaged product.
13 g
Package height:The distance from the top to the bottom of the packaging.
138 mm
Package width:The distance from one side of the packaging to the other.
136 mm

Performance
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Colour depth:
24 bit
Maximum refresh rate:
75 Hz
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
3840 x 2160 pixels
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
18 Gbit/s
Supported video modes:The video modes that can be displayed by the device.
720p
Product colour:
Black

Ports & interfaces
Connector 1 gender:
Male
Connector 2 gender:
Female
Connector 2:This is the second connector in the device.
HDMI
Connector 1:This is the first connector in the device.
HDMI

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
8 g

Product details

32115 Lindy 4002888321150

Lindy HDMI 2.0 EDID Emulator

£43.00 and In stock

SKU: 32115

Lindy HDMI 2.0 EDID Emulator

Quick Code: Q222841 MPN: 32115

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • Continuously emulates HDMI EDID information
  • Powered via HDMI Source Interface