Overview



The equip® Cat.6A S/FTP Patch Cord is composed of preeminent materials and fully-examined to conform with industrial standards. Offering higher bandwidth and better signal-to-noise margin, the Cat.6A cable is able to deliver ultrahigh and error-free performance in the most demanding network environments, specially for 10G application




At-a-glance



  • 4 x 2 AWG 26/7

  • 500MHz performance Bandwidth

  • Compliant with ISO/IEC 11801 and EN 50173

  • Foil and braid shield Reduces EMI/RFI interference

  • Low Smoke Zero Halogen (LSZH/LSOH)

  • Molded boot with Strain relief

  • PIMF (Pairs in metal Foil)

  • RoHS compliant

  • Stranded bare copper conductor

  • Suitable for PoE, PoE+

  • Transmission: 10Gbit




Reasons to buy


  • 4 x 2 AWG 26/7
  • 500MHz performance Bandwidth
  • Compliant with ISO/IEC 11801 and EN 50173
  • Foil and braid shield Reduces EMI/RFI interference
  • Low Smoke Zero Halogen (LSZH/LSOH)
  • Molded boot with Strain relief
  • PIMF (Pairs in metal Foil)
  • RoHS compliant
  • Stranded bare copper conductor
  • Suitable for PoE, PoE+
  • Transmission: 10Gbit

Specification


Technical Description: Equip Cat.6A S/FTP Patch Cable, White, 25m

Certificates
Compliance certificates:
RoHS

Certification
Compliance certificates:
RoHS

Features
Country of origin:Country where the device is made.
China
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Molded cable boot:
Yes
Power over Ethernet (PoE) type supported:
PoE+
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Frequency:
500 MHz
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
10000 Mbit/s
AWG wire size:
26/7
Ethernet interface type:
10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Cabling technology:Type of cable technology performance.
10GBase-T
Conductor material:
Copper
Cable shape:
Round
Jacket material:
Low smoke zero halogen (LSZH)
Connector 1 form factor:
Straight
Connector 1 gender:
Male
Connector 2 form factor:
Straight
Connector 2 gender:
Male
Connector 2:This is the second connector in the device.
RJ-45
Connector 1:This is the first connector in the device.
RJ-45
Product colour:
White
Cable shielding:The protective layer for the cable, typically made of plastic.
S/FTP (S-STP)
Cable standard:The category of the cable, which is determined by performance characteristics and test requirements.
Cat6a
Cable length:How long the cable is.
25 m

Logistics data
Products per master (outer) case:
20 pc(s)
Master (outer) case gross weight:
16 kg
Master (outer) case height:
350 mm
Master (outer) case length:
290 mm
Master (outer) case width:
380 mm
Customs product code (TARIC):
85444210

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package type:The type of product package e.g. box.
Polybag
Package weight:Weight of the packaged product.
767.16 g
Package depth:The distance from the front to the back of the packaging.
335 mm
Package width:The distance from one side of the packaging to the other.
250 mm

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
755.16 g


Product details


606013 Equip

Equip Cat.6A S/FTP Patch Cable, White, 25m

£30.73 and In stock

SKU606013

Equip Cat.6A S/FTP Patch Cable, White, 25m

Quick Code: Q1824591 MPN: 606013

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • 4 x 2 AWG 26/7
  • 500MHz performance Bandwidth
  • Transmission: 10Gbit
  • Suitable for PoE, PoE+
  • Stranded bare copper conductor
  • Foil and braid shield Reduces EMI/RFI interference