Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
10 - 23000 Hz
Channels quantity:The number of channels the device has. There can be an individual input or output for each channel.
8 channels
Inputs
Microphone input impedance:
3300 O
Outputs
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.05%
Ports & interfaces
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
Number of microphone inputs:
6
Microphone in:The socket where a microphone is connected to the device.
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 -240 V
Technical details
Video capability:Capability of video recording/playback.
Rack capacity:The spase that device fill in rack.
1U
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Weight & dimensions
Package weight:Weight of the packaged product.
2.2 kg
Package height:The distance from the top to the bottom of the packaging.
44 mm
Package depth:The distance from the front to the back of the packaging.
130 mm
Package width:The distance from one side of the packaging to the other.
482 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.43 kg
Height:The measurement of the product from head to foot or from base to top.
44 mm
Depth:The distance from the front to the back of something.
130 mm
Width:The measurement or extent of something from side to side.
482 mm
