Certificates
Safety:List of regulatory safety standards for all countries in which this product has been certified.
UL 1950, CSA 22.2 No.60 950
Compliance certificates:
CE, RoHS
Certification
Safety:List of regulatory safety standards for all countries in which this product has been certified.
UL 1950, CSA 22.2 No.60 950
Compliance certificates:
CE, RoHS
Features
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
87658 h
General
Type:Characteristics of the device.
Network Transceiver Modules
Logistics data
Harmonized System (HS) code:
85369010
Operational conditions
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)
Performance
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Fiber ethernet cabling technology:
1000BASE
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3z
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
1000 m
SFP transceiver standard:
SX
Fiber cable diameters supported (core/cladding):
50/125,62.5/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Maximum data transfer rate:
1250 Mbit/s
SFP transceiver type:
Fiber optic
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
0.5 W
Input voltage:The voltage (V) which is required to power the product.
3.3 V
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
8.5 mm
Depth:The distance from the front to the back of something.
13.8 mm
Width:The measurement or extent of something from side to side.
57 mm
