Overview



The DAP142 is a Teltonika industrial wireless access point with passive PoE, engineered for enhanced and reliable Wi-Fi coverage and performance in industrial environments. This access point is equipped with an RS232 port and two RJ45 ports, and is powered via a 3-pin power connector, making it ideal for specialised industrial applications. In addition to Wi-Fi 4 capabilities, the DAP142 supports Wi-Fi mesh, Fast Roaming, and up to 50 simultaneous connections. With an integrated DIN rail bracket, durable aluminium casing, and plug-and-play functionality, this wireless access point provides simple installation and configuration at minimum effort.




At-a-glance



  • 1 x 3-pin power connector tailored for industrial use

  • Easy mounting for plug-and-play deployment

  • Featuring two RJ45 ports & an RS232 port

  • INTEGRATED DIN RAIL BRACKET

  • MULTIPLE INTERFACES

  • POWER INPUT

  • Seamless Wi-Fi 4 with Wi-Fi mesh & Fast Roaming

  • WIRELESS AP CAPABILITIES




Reasons to buy


  • 1 x 3-pin power connector tailored for industrial use
  • Easy mounting for plug-and-play deployment
  • Featuring two RJ45 ports & an RS232 port
  • INTEGRATED DIN RAIL BRACKET
  • MULTIPLE INTERFACES
  • POWER INPUT
  • Seamless Wi-Fi 4 with Wi-Fi mesh & Fast Roaming
  • WIRELESS AP CAPABILITIES

Specification


Technical Description: Teltonika DAP142 300 Mbit/s Black Power over Ethernet (PoE)

Antenna
Antenna type:Type of antenna, also known an aerial, e.g. external, internal.
External

Design
LED indicators:
Power
Reset button:
Yes
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Housing material:
Aluminium
Product colour:
Black
Placement:Where the product can be placed e.g. floor, wall.
Pole, Shelf

Features
Cabling technology:Type of cable technology performance.
10/100Base-T(X)
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Maximum data transfer rate:
300 Mbit/s
5 GHz:
No
6 GHz:
No
2.4 GHz:
Yes

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Ports & interfaces
RS-232 interface:
Yes
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
0
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2

Power
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Power over Ethernet (PoE) type supported:
Passive PoE

Protocols
IPv4 & IPv6 features:
Dual stack IPv4/IPv6
DHCP client:
Yes
DHCP server:A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.
Yes

Security
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
OWE, WPA-EAP, WPA-PSK, WPA2-EAP, WPA2-PSK, WPA3-EAP, WPA3-SAE

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
150 g
Height:The measurement of the product from head to foot or from base to top.
25 mm
Depth:The distance from the front to the back of something.
68.6 mm
Width:The measurement or extent of something from side to side.
113.1 mm


Product details


DAP142000000 TELTONIKA 4779051843268

Teltonika DAP142 300 Mbit/s Black Power over Ethernet (PoE)

£69.37 and In stock

SKUDAP142000000

Teltonika DAP142 300 Mbit/s Black Power over Ethernet (PoE)

Quick Code: Q2498656 MPN: DAP142000000

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • WIRELESS AP CAPABILITIES
  • Seamless Wi-Fi 4 with Wi-Fi mesh & Fast Roaming
  • MULTIPLE INTERFACES
  • Featuring two RJ45 ports & an RS232 port
  • POWER INPUT
  • INTEGRATED DIN RAIL BRACKET