Certificates
Compliance certificates:
CE, UKCA, WEEE
Certification
Compliance certificates:
CE, UKCA, WEEE
Features
LED indicators:
Activity, Link
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Internal:The product is built in.
Logistics data
Products per master (outer) case:
100 pc(s)
Master (outer) case gross weight:
17 kg
Master (outer) case height:
275 mm
Master (outer) case length:
560 mm
Master (outer) case width:
475 mm
Country of origin:Country where the device is made.
China
Harmonized System (HS) code:
85176990
Master (outer) cases per pallet (air):
15 pc(s)
Pallet gross length:
80 cm
Pallet gross width:
120 cm
Pallet height (air):
154.4 cm
Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Copper ethernet cabling technology:
10BASE-T, 100BASE-T, 1000BASE-T
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
1000 Mbit/s
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3z
Maximum data transfer rate:
1000 Mbit/s
Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Copper ethernet cabling technology:
10BASE-T, 100BASE-T, 1000BASE-T
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
1000 Mbit/s
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3z
Maximum data transfer rate:
1000 Mbit/s
Operational conditions
Operating relative humidity (H-H):
5 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-20 - 70 °C
Packaging content
Quick installation guide:
Packaging data
Package type:The type of product package e.g. box.
Box
Package weight:Weight of the packaged product.
160 g
Package height:The distance from the top to the bottom of the packaging.
45 mm
Package depth:The distance from the front to the back of the packaging.
105 mm
Package width:The distance from one side of the packaging to the other.
135 mm
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
100000 h
Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1.2 W
Input voltage:The voltage (V) which is required to power the product.
5 V
Sustainability
Sustainability compliance:
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
56 g
Height:The measurement of the product from head to foot or from base to top.
18.5 mm
Depth:The distance from the front to the back of something.
79 mm
Width:The measurement or extent of something from side to side.
23.3 mm
