Overview



Lower Capacity and Cost Effective for Smaller Data Sets and Legacy Applications

Data centers face growing pressures to manage costs. For affordable server boot drives, or applications that use smaller data sets, Western Digital offers the Ultrastar DC HA200 series, an entry-level, low capacity line of enterprise-class hard drives. Designed to handle workloads up to 550TB per year, the Ultrastar DC HA200 series delivers up to 2TB cost-effective storage capacity for data center environments. Rotational Vibration Safeguard (RVS) technology utilizes sophisticated electronics to monitor the drive and correct both linear and rotational vibration disturbances in real time—especially helpful in multi-drive arrays and rack-mounted systems maintaining high read/write performance. Ultrastar DC HA200 series is offered with a SATA 6 Gb's interface and native 512-byte (512n) sector size for compatibility with legacy data center applications.

Entry-Level Affordability

Low Capacity
Optimized for server boot and smaller data sets.

Legacy Support
Native 512-byte sectors with SATA 6 Gb's interface.

Enterprise Class
2M hour MTBF rating.

- Up to 2TB capacity in a standard 3.5-inch form factor
- RVS anti-vibration technology for robust performance in multi-drive environments
- Reliable, field-proven design
- SATA 6 Gb's with 512-byte (512n) supports legacy enterprise applications




At-a-glance



  • Reliable, field-proven design

  • RVS anti-vibration technology for robust performance in multi-drive environments

  • SATA 6 Gb/s with 512-byte (512n) supports legacy enterprise applications

  • Up to 2TB capacity in a standard 3.5-inch form factor




Reasons to buy


  • Reliable, field-proven design
  • RVS anti-vibration technology for robust performance in multi-drive environments
  • SATA 6 Gb/s with 512-byte (512n) supports legacy enterprise applications
  • Up to 2TB capacity in a standard 3.5-inch form factor

Specification


Technical Description: Western Digital Ultrastar DC HA210 internal hard drive 2 TB 7200 RPM 128 MB 3.5" Serial ATA III

Features
Certification:
REACH
RoHS compliance:The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
Yes
Bytes per sector:
512
Average latency:The average duration before a device can start with a job (for example reading a file from a hard disk).
4.2 ms
HDD sustained transfer rate:
191 MiB/s
Storage drive buffer size:
128 MB
Hot-swap:
No
Component for:What this product is used as a part of (component for).
PC
Type:Characteristics of the device.
HDD
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Serial ATA III
HDD speed:
7200 RPM
HDD capacity:
2000 GB
HDD size:
3.5"

Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
300 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
65 G
Non-operating vibration:Environmental requirements for vibration in non-operating mode
3.8 G
Operating vibration:Environmental requirements for vibration in operating mode
1.08 G
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
5 - 60 °C

Other features
Native Command Queuing (NCQ):
Yes

Packaging content
Manual:
Yes
Storage drive adapter included:
No

Power
Operating voltage:Defines the range of operating voltages available
5 / 12 V
Power consumption (idle):
5.9 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
8.1 W

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
640 g
Depth:The distance from the front to the back of something.
147 mm
Height:The measurement of the product from head to foot or from base to top.
26.1 mm
Width:The measurement or extent of something from side to side.
101.6 mm


Product details


HUS722T2TALA604 Hitachi 5706998649461

Western Digital Ultrastar DC HA210 internal hard drive 2 TB 7200 RPM 128 MB 3.5" Serial ATA III

£182.35 and In stock

SKUHUS722T2TALA604

Western Digital Ultrastar DC HA210 internal hard drive 2 TB 7200 RPM 128 MB 3.5" Serial ATA III

Quick Code: Q540556 MPN: HUS722T2TALA604

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us