Overview



10Gbps Fiber Ports and Multiple Dual Speed Ports Deliver High-speed Networking

PLANET IGS-6325-5X1T is a brand-new all-port 10Gbps Industrial-grade Layer 3 Managed Ethernet Switch which features 5 10GBASE-SR/LR SFP+ ports, 1 10GBASE-T copper port and Layer 3 IP routing in a RuggedCloseA rugged item is specifically designed to operate reliably in harsh usage environments and conditions, such as strong vibrations, extreme temperatures and wet or dusty conditions. They are used in the agricultural industries, and by individuals for outdoor recreation activities. IP30 metal case for stable operation in heavy industrial environments.


With 10Gbps fiber or copper interfaces, the IGS-6325-5X1T can handle extremely large amounts of data in a secure topology linking to an industrial backbone, 5G NR base station or Wi-Fi6/6E wireless AP. The IGS-6325-5X1T is capable of providing non-blocking switch fabric and wire-speed throughput as high as 120Gbps in the temperature range from -40 to 75 degrees C. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands.


10GBASE-T and 10GBASE-X SFP Dual Media Interfaces for Diversified Bandwidth Applications

The IGS-6325-5X1T has the capability to reach a high speed of 10Gbps over copper or fiber-optic cabling which helps to accelerate the performance of large data transmission. The built-in 10GBASE-T copper interfaces support 5-speed (10G/5G/2.5G/1G/100) auto-negotiation, and 10Gbps data transmission with the existing Cat6A/Cat7 UTP cabling, meaning the speed can be increased without costs. It can definitely give you the speed you demand and its Plug and Play makes installation easy.


The fiber-optic 10GBASE-X SFP+ interfaces support triple speeds, 10GBASE-SR/LR, 2500BASE-X and 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The IGS-6325-5X1T provides broad bandwidth and powerful processing capacity.


Redundant Ring, Fast Recovery for Critical Network Applications

The IGS-6325-5X1T supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple ring network, the recovery time of data link can be as fast as 10ms.


Layer 3 Routing Support

The IGS-6325-5X1T enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically.

The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination.

The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.


Robust Layer 2

The IGS-6325-5X1T can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the IGS-6325-5X1T allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well.


Cybersecurity Network Solution to Minimize Security Risks

The IGS-6325-5X1T comes with enhanced cybersecurity to fend off cyberthreats and cyberattacks. It supports SSHv2 and TLSv1.2 protocols to provide strong protection against advanced threats. Served as a key point to transmit data over a long-distance fiber optic cable to customer's critical equipment in a business network, the cybersecurity feature of the IGS-6325-5X1T protects the switch management and enhances the security of the mission-critical network without any extra deployment cost and effort.


Modbus TCP Provides Flexible Network Connectivity for Factory Automation

With the supported Modbus TCP/IP protocol, the IGS-6325-5X1T can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information, communication status, and DI and DO status, thus easily achieving enhanced monitoring and maintenance of the entire factory.


1588 Time Protocol for Industrial Computing Networks

The IGS-6325-5X1T is ideal for telecom and carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.


SMTP/SNMP Trap Event Alert

The IGS-6325-5X1T provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.


Effective Alarm Alert for Better Protection

The IGS-6325-5X1T supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time to find where the problem is. It will help to save time and human resource.


Digital Input and Digital Output for External Alarm

The IGS-6325-5X1T supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the I IGS-6325-5X1T’s port shows link down, link up or power failure.


IPv6/IPv4 Dual Stack

Supporting both IPv6 and IPv4 protocols, the IGS-6325-5X1T helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.


Efficient Management

For efficient management, the IGS-6325-5X1T is equipped with console, Web and SNMP management interfaces.

- With the built-in Web-based management interface, the IGS-6325-5X1T offers an easy-to-use, platform-independent management and configuration facility.
- For text-based management, it can be accessed via Telnet and the console port.
- For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management.


Powerful Network Security

The IGS-6325-5X1T offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.


Advanced IP Network Protection

The IGS-6325-5X1T also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.


Excellent Traffic Control

The IGS-6325-5X1T is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission.


Intelligent SFP Diagnosis Mechanism

The IGS-6325-5X1T supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.


Learn more: http://www.planet.com.tw/en/product/igs-6325-5x1t




At-a-glance



  • 1 100/1G/2.5G/5G/10GBASE-T RJ45 copper port

  • 2 digital input (DI)

  • 2 digital output (DO)

  • 40 to 75 degrees C operating temperature

  • 5 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP

  • 8 priority queues on all switch ports

  • Compatible with Cisco uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices

  • Digital Input and Digital Output

  • DIN-rail and wall-mountable designs

  • DSCP remarking

  • Dual power input, redundant power with reverse polarity protection

  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

  • IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode

  • Industrial Hardened Design

  • Ingress shaper and egress rate limit per port bandwidth control

  • Integrates sensors into auto alarm system

  • IP30 aluminum case

  • IPv4 dynamic routing protocol supports RIPv2 and OSPFv2 and IPv6 OSPFv3

  • IPv4 IGMP snooping port filtering

  • IPv4/IPv6 hardware static routing

  • IPv6 dynamic routing protocol supports OSPFv3

  • IPv6 MLD snooping port filtering

  • Layer 2 Features

  • Layer 3 IP Routing Features

  • Link Layer Discovery Protocol (LLDP)

  • Loop protection to avoid broadcast loops

  • Multicast

  • MVR (Multicast VLAN Registration)

  • o 802.3ad Link Aggregation Control Protocol (LACP)

  • o Active-active redundant power failure protection

  • o Backup of catastrophic power failure on one supply

  • o BPDU Guard

  • o Broadcast/Multicast/Unknown unicast

  • o Cisco ether-channel (static trunk)

  • o DC 9 to 48V input or AC 24V input

  • o Fault tolerance and resilience

  • o GVRP (GARP VLAN Registration Protocol)

  • o IEEE 802.1D Spanning Tree Protocol (STP)

  • o IEEE 802.1p CoS

  • o IEEE 802.1Q tagged VLAN

  • o IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN

  • o IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

  • o IP TCP/UDP port number

  • o MAC-based VLAN

  • o Maximum 3 trunk groups, with 6 ports for each trunk

  • o Private VLAN Edge (PVE)

  • o Protocol-based VLAN

  • o Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)

  • o ToS/DSCP/IP Precedence of IPv4/Ipv6 packets

  • o Typical network application

  • o Voice VLAN

  • One RJ45-to-RS232 console interface for basic management and setup

  • Physical Port

  • Port mirroring to monitor the incoming or outgoing traffic on a particular port

  • Provides port mirror (many-to-1)

  • Quality of Service

  • Querier mode support

  • Routing interface provides per VLAN routing mode

  • Storm control support

  • Strict priority and Weighted Round Robin (WRR) CoS policies

  • Supports 6000V DC Ethernet ESD protection

  • Supports G.8032 ERPS (Ethernet Ring Protection Switching)

  • Supports IPv4 IGMP snooping v1, v2 and v3

  • Supports IPv6 MLD snooping v1 and v2

  • Supports Link Aggregation

  • Supports QoS and In/Out bandwidth control on each port

  • Supports Spanning Tree Protocol

  • Supports VLAN

  • Traffic classification

  • Traffic-policing on the switch port

  • Transfers alarm to IP network via email and SNMP trap

  • Voice VLAN




Reasons to buy


  • 1 100/1G/2.5G/5G/10GBASE-T RJ45 copper port
  • 2 digital input (DI)
  • 2 digital output (DO)
  • 40 to 75 degrees C operating temperature
  • 5 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
  • 8 priority queues on all switch ports
  • Compatible with Cisco uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
  • Digital Input and Digital Output
  • DIN-rail and wall-mountable designs
  • DSCP remarking
  • Dual power input, redundant power with reverse polarity protection
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
  • Industrial Hardened Design
  • Ingress shaper and egress rate limit per port bandwidth control
  • Integrates sensors into auto alarm system
  • IP30 aluminum case
  • IPv4 dynamic routing protocol supports RIPv2 and OSPFv2 and IPv6 OSPFv3
  • IPv4 IGMP snooping port filtering
  • IPv4/IPv6 hardware static routing
  • IPv6 dynamic routing protocol supports OSPFv3
  • IPv6 MLD snooping port filtering
  • Layer 2 Features
  • Layer 3 IP Routing Features
  • Link Layer Discovery Protocol (LLDP)
  • Loop protection to avoid broadcast loops
  • Multicast
  • MVR (Multicast VLAN Registration)
  • o 802.3ad Link Aggregation Control Protocol (LACP)
  • o Active-active redundant power failure protection
  • o Backup of catastrophic power failure on one supply
  • o BPDU Guard
  • o Broadcast/Multicast/Unknown unicast
  • o Cisco ether-channel (static trunk)
  • o DC 9 to 48V input or AC 24V input
  • o Fault tolerance and resilience
  • o GVRP (GARP VLAN Registration Protocol)
  • o IEEE 802.1D Spanning Tree Protocol (STP)
  • o IEEE 802.1p CoS
  • o IEEE 802.1Q tagged VLAN
  • o IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
  • o IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
  • o IP TCP/UDP port number
  • o MAC-based VLAN
  • o Maximum 3 trunk groups, with 6 ports for each trunk
  • o Private VLAN Edge (PVE)
  • o Protocol-based VLAN
  • o Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
  • o ToS/DSCP/IP Precedence of IPv4/Ipv6 packets
  • o Typical network application
  • o Voice VLAN
  • One RJ45-to-RS232 console interface for basic management and setup
  • Physical Port
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Provides port mirror (many-to-1)
  • Quality of Service
  • Querier mode support
  • Routing interface provides per VLAN routing mode
  • Storm control support
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports 6000V DC Ethernet ESD protection
  • Supports G.8032 ERPS (Ethernet Ring Protection Switching)
  • Supports IPv4 IGMP snooping v1, v2 and v3
  • Supports IPv6 MLD snooping v1 and v2
  • Supports Link Aggregation
  • Supports QoS and In/Out bandwidth control on each port
  • Supports Spanning Tree Protocol
  • Supports VLAN
  • Traffic classification
  • Traffic-policing on the switch port
  • Transfers alarm to IP network via email and SNMP trap
  • Voice VLAN

Specification


Technical Description: PLANET Industrial Layer 3 5-Port Managed L3 10G Ethernet (100/1000/10000) Aluminium, Blue

Certificates
Certification:
FCC Part 15 Class A CE: EN55032 EN55035

Certification
Certification:
FCC Part 15 Class A CE: EN55032 EN55035

Data transmission
Packet buffer memory:
32 MB
Jumbo frames:
10000
Jumbo frames support:
Yes
Store-and-forward:
Yes
Throughput:Rate at which data can be transferred.
89.285 Mpps
Switching capacity:The data transfer capacity of the switch per second.
120 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
32000 entries

Design
DIN rail mounting:
Yes
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Wall mountable:The product can be mounted on (attached to ) a wall.
Yes
LED indicators:
Yes
Reset button:
Yes
Housing material:
Aluminium
Product colour:
Aluminium, Blue

Management features
System event log:
Yes
Traffic classification:
Yes
Web-based management:Using a website/web application to manage something.
Yes
Quality of Service (QoS) support:
Yes
Switch layer:A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things).
L3
Switch type:What switch device has, managed or unmanaged.
Managed

Multicast features
Multicast support:
Yes

Network
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
Link aggregation:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ah, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Networking
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
Link aggregation:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ah, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C

Ports & interfaces
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
5
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
1

Power
DC input voltage:
9 - 48 V
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
24 V
Power source:What is providing power for the product e.g. mains electricity.
AC/DC

Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
No

Security
Access Control List (ACL):
Yes

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.55 kg
Height:The measurement of the product from head to foot or from base to top.
135 mm
Depth:The distance from the front to the back of something.
135 mm
Width:The measurement or extent of something from side to side.
80 mm


Product details


IGS-6325-5X1T Planet 0847690010366

PLANET Industrial Layer 3 5-Port Managed L3 10G Ethernet (100/1000/10000) Aluminium, Blue

£733.99 and In stock

SKUIGS-6325-5X1T

PLANET Industrial Layer 3 5-Port Managed L3 10G Ethernet (100/1000/10000) Aluminium, Blue

Quick Code: Q1619154 MPN: IGS-6325-5X1T

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • Physical Port
  • 1 100/1G/2.5G/5G/10GBASE-T RJ45 copper port
  • Industrial Hardened Design
  • o DC 9 to 48V input or AC 24V input
  • o Active-active redundant power failure protection
  • o Fault tolerance and resilience