Main product

Overview


A small form-factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fiber.




Specification

Technical Description: HPE X121 network transceiver module Fiber optic 1000 Mbit/s SFP 1550 nm
Performance
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
No
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1550 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
70000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1 W

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
20 g

Product details

J4860C HP 0883585267828

HPE X121 network transceiver module Fiber optic 1000 Mbit/s SFP 1550 nm

£134.99 and In stock

SKU: J4860C

HPE X121 network transceiver module Fiber optic 1000 Mbit/s SFP 1550 nm

Quick Code: Q1438468 MPN: J4860C

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us