Features
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
300000 h
Average latency:The average duration before a device can start with a job (for example reading a file from a hard disk).
7.14 ms
Track to track seek time:
2 ms
Full stroke seek time:
22 ms
HDD number of cylinders:
34040
Storage drive buffer size:
2 MB
Type:Characteristics of the device.
HDD
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Parallel ATA
Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
800 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
200 G
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
5 - 55 °C
Other features
Acoustic pressure emissions:Level of sound pressure per ISO 9614-1.
24 dB
Windows operating systems supported:Windows vesions wich can be used with the device.
Packaging data
Quantity per pack:The amount in each pack.
1 pc(s)
Power
Operating voltage:Defines the range of operating voltages available
5 V
Power consumption (read):
2.3 W
Power consumption (write):
2.3 W
Power consumption (PowerSave):
0.1 W
Power consumption (standby):The amount of electricity that is consumed when the product is on standby.
0.25 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
94 g
Depth:The distance from the front to the back of something.
100 mm
Height:The measurement of the product from head to foot or from base to top.
9.5 mm
Width:The measurement or extent of something from side to side.
69.8 mm
