Certificates
Certification:
FCC Part15 Class A
CE
EMC/LVD
RoHS
EN61000
4 2 (ESD):LEVEL 4
IEC 6100 4 2 (EFT):LEVEL 4
IEC 6100 4 2 (Surge): LEVEL 4
IEC 6100 4 2 (CS) LEVEL 3
IEC 61000 4 2(PFMP) : LEVEL 5
EN61000 4 3 (RS):LEVEL 4
IEC60068 2 27
IEC60068 2 6
IEC60068 2 31
Safety:List of regulatory safety standards for all countries in which this product has been certified.
EN 60950 1, UL 60950 1, CSA C22.2 No.60950 1, UL 508
Certification
Certification:
FCC Part15 Class A
CE
EMC/LVD
RoHS
EN61000
4 2 (ESD):LEVEL 4
IEC 6100 4 2 (EFT):LEVEL 4
IEC 6100 4 2 (Surge): LEVEL 4
IEC 6100 4 2 (CS) LEVEL 3
IEC 61000 4 2(PFMP) : LEVEL 5
EN61000 4 3 (RS):LEVEL 4
IEC60068 2 27
IEC60068 2 6
IEC60068 2 31
Safety:List of regulatory safety standards for all countries in which this product has been certified.
EN 60950 1, UL 60950 1, CSA C22.2 No.60950 1, UL 508
Features
Housing material:
Aluminium
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP40
LED indicators:
Link, Power
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Internal:The product is built in.
Logistics data
Country of origin:Country where the device is made.
United Kingdom
Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Packet forwarding rate (1 Gbps):
1488000 pps
Packet forwarding rate (100 Mbps):
148800 pps
Packet forwarding rate (10 Mbps):
14880 pps
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
1000 Mbit/s
Fiber ethernet cabling technology:
1000BASE-X
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-TX
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
1000Base-TX, 1000Base-X
Maximum data transfer rate:
1000 Mbit/s
Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Packet forwarding rate (1 Gbps):
1488000 pps
Packet forwarding rate (100 Mbps):
148800 pps
Packet forwarding rate (10 Mbps):
14880 pps
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
1000 Mbit/s
Fiber ethernet cabling technology:
1000BASE-X
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-TX
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
1000Base-TX, 1000Base-X
Maximum data transfer rate:
1000 Mbit/s
Operational conditions
Operating relative humidity (H-H):
5 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C
Packaging content
Quick installation guide:
Packaging data
Package weight:Weight of the packaged product.
52 g
Package height:The distance from the top to the bottom of the packaging.
50 mm
Package depth:The distance from the front to the back of the packaging.
168 mm
Package width:The distance from one side of the packaging to the other.
150 mm
Performance
Wavelength-division multiplexing (WDM):
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
160000 m
Ports & interfaces
Power over Ethernet plus (PoE+) ports quantity:
1
Power over Ethernet (PoE) ports quantity:
1
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Total Power over Ethernet (PoE) budget:
30 W
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Power consumption (max):The maximum amount of power used by the device.
4 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
2 W
Input voltage:The voltage (V) which is required to power the product.
48 - 56 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
350 g
Height:The measurement of the product from head to foot or from base to top.
120 mm
Depth:The distance from the front to the back of something.
90 mm
Width:The measurement or extent of something from side to side.
35 mm
