Amplifier
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
83 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.2%
Amplification device form factor:
Built-in
Amplification device type:
Amplifier
Amplification device included:The product has an amplification device, which is used to strengthen a signal(s).
Packaging content
Packaging data
Package weight:Weight of the packaged product.
6 kg
Performance
Remotely operated:The device can be controlled by remote control, which is a device that controls an apparatus by means of radio or infrared signals.
Housing material:
Acrylonitrile butadiene styrene (ABS)
Recommended usage:What the product should be used for, and how it should be used (e.g. ambient temperature).
Universal
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
60 W
Ports & interfaces
Headphone connectivity:How headphones connect to a device e.g. wirelessly or via a cable and connector.
3.5 mm
Headphone out:The socket for connecting headphones to the device.
Headphone outputs:Number of sockets /ports where headphones are connected.
1
Line-in connectivity:
3.5 mm
Bluetooth:Bluetooth is a low-power radio technology developed to replace the cables and wires currently used to link or connect electronic devices such as personal computers, printers, and a wide variety of handheld devices including mobile phones. Because it uses radio-wave connectivity, a Bluetooth-enabled device has a constant, established connection to whatever browser it uses. This saves the user the trouble of logging on to check for emails or news updates, for example.
Connectivity technology:
Wired
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
90 - 240 V
Power consumption (standby):The amount of electricity that is consumed when the product is on standby.
0.7 W
Power source:What is providing power for the product e.g. mains electricity.
AC
Satellite speakers
Satellite speakers wall mountable:
Satellite speaker sensitivity:
85 dB
Satellite speaker woofer diameter (imperial):
13.3 cm (5.25")
Satellite speaker tweeter diameter:
1.27 cm (0.5")
Satellite speaker crossover frequency:
8000 Hz
Satellite speaker frequency range:
45 - 20000 Hz
Satellite speakers RMS power:This is a measure of the continuous power (RMS power) produced by a satellite speaker.
60 W
Number of satellite speakers:The quantity of satellite speakers. These are speakers used in surround-sound systems that are intended to be placed around a center channel speaker, as a part of a technique to recreate "three-dimensional" immersive sound; they tend to be smaller than the center speaker, and often contain audio to the left, right, and behind of the center channel.
2
Satellite speaker type:Satellite speaker number of ways.
2-way
Subwoofer
Bass reflex:Type of loudspeaker enclosure that uses the sound from the rear side of the diaphragm to increase the efficiency of the system at low frequencies as compared to a typical closed box loudspeaker or an infinite baffle mounting.
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
265 mm
Depth:The distance from the front to the back of something.
172 mm
Width:The measurement or extent of something from side to side.
183 mm
