Overview



TP-583T is a high-performance, long-reach HDBaseT transmitter for 4K HDR HDMI, RS-232 and IR signals over twisted pair. TP-583T converts all input signals into the transmitted HDBaseT signal. It extends video signals to up to 70m (230ft) over Kramer copper cables at up to 4K@60Hz (4:4:4) video resolutions. It is compatible with standard HDBaseT-compliant extenders at 4K@30Hz and HD video resolutions.

High Performance Standard Extender — Professional HDBaseT extender for providing long–reach signals over twisted–pair copper infrastructures. It employs low–level video compression technology that delivers visually lossless performance for 4K@60 (4:4:4) and HDR signals with near–zero latency. This high–quality compressed signal is extended to almost double the extension reach of the uncompressed signal.
Future–proof, Standard Extender — TP–583T is a standard HDBaseT extender, backwards compatible with other standard HDBT extenders. It extends either compressed or uncompressed HDBaseT signal, by auto–adapting to the compression capabilities of its connected extender. This enables it to be connected to any market–available HDBaseT–compliant extension product.
Intelligent Compression Handling — Automatically detects a standard HDBaseT extender without compression and disables the compression to extend the signal in compliance with the detected extender.

HDMI Signal Extension — HDR HDCP 2.2 compliant. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals are passed through from the source to the display.

I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.

Multi–channel Audio Extension — Up to 32 channels of digital stereo uncompressed signals for supporting studio–grade surround sound.

Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control.

Bidirectional Infrared Extension — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.

Cost–Effective Maintenance — Status LED indicators for HDMI and HDBT ports facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS–232 connection ensures lasting, field–proven deployment.

Easy Installation — Compact DigiTOOLS® fan–less enclosure for dropped–ceiling mounting, or side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.




At-a-glance



  • Bidirectional RS–232 & IR control extension

  • HDBaseT 1.0 transmitter

  • Up to 40m (130ft) at 4K@60Hz (4:4:4)

  • Up to 70m (230ft) at up to 4K@30Hz (4:4:4)




Reasons to buy


  • Bidirectional RS–232 & IR control extension
  • HDBaseT 1.0 transmitter
  • Up to 40m (130ft) at 4K@60Hz (4:4:4)
  • Up to 70m (230ft) at up to 4K@30Hz (4:4:4)

Specification


Technical Description: Kramer Electronics TP-583T AV Extenders - Black

Features
Certification:
WEEE, CE, RoHs, UL
HDBaseT certified:
Yes
Product colour:
Black
Bandwidth:Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
18 Gbit/s
Baud rate:
115.2 Kbit/s
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Yes
LED indicators:
Yes
Material:The material from which a thing is or can be made e.g. wood, plastic.
Aluminium
Supported video modes:The video modes that can be displayed by the device.
1080p, 2160p
Audio system:System used to play music or speech.
stereo
Maximum refresh rate:
60 Hz
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
70 m
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
4096 x 2160 pixels
Type:Characteristics of the device.
AV transmitter

Operational conditions
Operating relative humidity (H-H):
10 - 90%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C

Packaging content
AC adapter included:
Yes

Packaging data
Package weight:Weight of the packaged product.
700 g
Package height:The distance from the top to the bottom of the packaging.
87 mm
Package depth:The distance from the front to the back of the packaging.
120 mm
Package width:The distance from one side of the packaging to the other.
157 mm
Quantity per pack:The amount in each pack.
1 pc(s)

Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
Yes
Remote (IR) output:
1
Serial interface type:
RS-232
Video in:
1
RS-232 input ports:
1
HDMI in:Port (socket) for HDMI input.
1
RJ-45 output ports:
1
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes
Connectivity technology:
Wired

Power
Power consumption (transmitter) (max):
480 mA
Operating voltage (transmitter):
12 V
Power source type:What the power source is.
DC

Technical details
Compliance certificates:
RoHS

Weight & dimensions
Transmitter weight:
300 g
Transmitter dimensions (WxDxH):
120 x 71.5 x 24.4 mm


Product details


TP-583T Kramer Electronics 7291063085148

Kramer Electronics TP-583T AV Extenders - Black

£267.42 and In stock

SKUTP-583T

Kramer Electronics TP-583T AV Extenders - Black

Quick Code: Q3159220 MPN: TP-583T

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • HDBaseT 1.0 transmitter
  • Up to 40m (130ft) at 4K@60Hz (4:4:4)
  • Up to 70m (230ft) at up to 4K@30Hz (4:4:4)
  • Bidirectional RS–232 & IR control extension