Overview



Wi-Tek WI-PS310GF-I V2. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8. MAC address table: 2000 entries, Switching capacity: 20 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3z. Power over Ethernet (PoE)




Specification


Technical Description: Wi-Tek WI-PS310GF-I V2 network switch Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black, Orange

Certificates
Certification:
CE, FCC
Compliance certificates:
CE, Federal Communications Commission (FCC)

Certification
Certification:
CE, FCC
Compliance certificates:
CE, Federal Communications Commission (FCC)

Data transmission
Packet buffer memory:
2.5 MB
Jumbo frames:
10
Jumbo frames support:
Yes
Store-and-forward:
Yes
Forwarding rate:
14.88 Mpps
Switching capacity:The data transfer capacity of the switch per second.
20 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
2000 entries

Design
LED indicators:
Yes
Housing material:
Metal
Product colour:
Black, Orange

Management features
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3z

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3z

Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 80 °C

Ports & interfaces
Combo SFP ports quantity:
2
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
8

Power
Power source:What is providing power for the product e.g. mains electricity.
DC

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
300 W
Power over Ethernet (PoE) ports quantity:
8
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.5 kg
Height:The measurement of the product from head to foot or from base to top.
50 mm
Depth:The distance from the front to the back of something.
140 mm
Width:The measurement or extent of something from side to side.
200 mm


Product details


WI-PS310GF-I V2 Wi-Tek 5420016868190

Wi-Tek WI-PS310GF-I V2 network switch Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black, Orange

£52.00 and In stock

SKUWI-PS310GF-I V2

Wi-Tek WI-PS310GF-I V2 network switch Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black, Orange

Quick Code: Q2053988 MPN: WI-PS310GF-I V2

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us