Main product

Overview


Wi-Tek Multi-Gigabit SFP Fiber Module is designed to extend transfer distances up to 20km with different fiber connectors. Single mode SFP module and multi-mode SFP module, which allows users to select the appropriate transceiver according to the required optical range for the network. The most common optical transceiver is 1310nm wavelength for a maximum of 20km with single mode fiber optics. Copper-based SFP modules primarily are 1000BASE-T and 1000BASE-TX SFP modules used in gigabit Ethernet networking within 100 meters. According to the transmission speed, Wi-Tek SFP module can provide the 10Gbps or 1.25Gbps modules.




Specification

Technical Description: Wi-Tek WI-SFP10SC-3KM network transceiver module Fiber optic 1250 Mbit/s SFP
Certificates
Certification:
CE, FCC

Certification
Certification:
CE, FCC

Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Housing material:
Metal

Operational conditions
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 80 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C

Performance
Rx wavelength (max):
1550 nm
Rx wavelength (min):
1310 nm
Tx wavelength (max):
1550 nm
Tx wavelength (min):
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
3000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
1250 Mbit/s
SFP transceiver type:
Fiber optic

Power
Maximum voltage:
3.3 V

Product details

WI-SFP10SC-3KM Wi-Tek 5420016868244

Wi-Tek WI-SFP10SC-3KM network transceiver module Fiber optic 1250 Mbit/s SFP

£13.00 and In stock

SKU: WI-SFP10SC-3KM

Wi-Tek WI-SFP10SC-3KM network transceiver module Fiber optic 1250 Mbit/s SFP

Quick Code: Q2053762 MPN: WI-SFP10SC-3KM

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us